Sunfire TGM-100C - Manual (Page 12)

10
Installation Manual
CHAPTER 2
A/V Receiver
Stereo
RCA
Cable
AUX1 VID1 VID3
TGM-100
IN IN IN
Analog Audio Connections - A/V Receiver
Stereo
RCA
Cable
TGM-100
SOUCE INPUT 1
SOUCE INPUT 5
V L R
Multi-Room
Controller
Analog Audio Connections - Multi-Room Controller
Analog Audio Connections
The Analog Audio output is connected to an audio routing
device such as an A/V Receiver or Multi-Room Controller
using stereo RCA audio cables.
Note: 5.1 Digital Audio Outputs are converted to 2 Channel
PCM when Analog Connections are enabled.
Note: When 2 channel PCM outputs are enabled, 5.1 Dig-
tal surround effects are disabled.
Note: Discrete IR codes are available when programming
touchpanels, keypads, etc. in whole-house audio systems.
These IR codes allow switching between stereo and sur-
round formats depending on the application.