Sunfire TGM-100C - Manual (Page 31)

29
Installation Manual
CHAPTER 3
Write down the • IP Address from the Assigned
Ethernet Settings screen.
Open a web browser on the PC that is connected to •
the network where the TGM-100 resides.
Type the IP address from the TGM-100 into the web •
browser. For example: 192.168.0.39.
You may now view and control all functions of the •
TGM-100 via the home computer.
•
There are three different Web UIs that may be accessed:
The • Touch Panel UI (ex. 192.168.0.39) shown above.
The • TV UI (ex. 192.168.0.39/tv).
The • Admin UI (ex. 192.168.0.39/admin)
Most actions will be performed using the TV UI (on the
Main TV dispaly) or the Admin UI (on the Web UI or the
Main TV display). The Web version of the Touch Panel UI
is primarily accessed when using ELAN wireless touch
panels.
Accessing Installer Settings Through
the Web UI
Once the IP Address is known and you are able to access
the TGM-100's Web UI, it is possible to access the Install-
er Settings menu via the home PC.
Open a web browser as previously described. •
Enter the IP Address of the TGM-100 with the addition •
of /admin. For example: 192.168.0.39/admin.
The Admin UI is now available for use. All installer •
settings are available from this UI, as well as all User
settings and all functionality of the unit.
Connecting Clients
Acces the Admin UI as previously described. •
On the TGM-100 Server, navigate to • Setup ->
Settings.
Select • Network Playback Confi guration.