Sunfire TGM-100C - Manual (Page 38)

36
Installation Manual
CHAPTER 4
The Add or Remove Programs window will be displayed:
Highlight the application you wish to uninstall by •
clicking on it.
Click on • Change/Remove.
Follow the prompts to complete the removal process. If you
are prompted by the installer to reboot, then do so. The unit
will automatically reboot into Engineering Mode.
When the removal process is complete, you will need to
leave Engineering Mode.
Leaving Engineering Mode
Click on • Engineering Menu to show the drop-down
menu.
Select • Leave Engineering Mode – Save Changes
from the drop-down menu.