Samsung 5400 - Manual (Page 79)

|
Handbook 79
Using a Chain Dial Number
1 Select the One Touch key or Auto Dial number
programmed with the first part of the chain dial number.
2 The display will show
PRESS OT/AD/SRCH KEY.
3 Select the One Touch key or Auto Dial number
programmed with the second part of the chain dial
number. If the second part of the chain dial number was
not programmed, enter it manually on the numeric
keypad.
4 Press the Start key to begin sending the fax.
Auto Dial Faxing
Programming Auto Dial Numbers
For each Auto Dial number, you can enter a fax number up to
32 digits long and a Location ID (name) up to 15 characters
long.
To program Auto Dial numbers:
1 Press the Select Function key.
2 Press the 8/Location Program One Touch key.
The display shows
LOCATION PROGRAMMING.
3 Press the Auto Dial key.
4 Using the numeric keypad, enter a 2-digit number for the
Auto Dial number you want to program. Up to 99 Auto
Dials numbers can be programmed.
5 The display briefly shows
NO=<FAX NO.>,
ID=<LOCATION ID>
or a previously programmed fax number and location.