0 connection, 0 remote control – Strong Enterprises SRT 60 User Manual

Page 10

Advertising
background image

7

n

User-friendly Remote Control

n

Low power consumption

n

Automatic and manual channel scan options

n

12 V mains supply for usage with camping caravans or houseboats (Car cigarette lighter adapter optional)

n

Connections: SAT IN, IR-Eye, Power Supply

*subject to local signal conditions

Accessories:

n

Remote control

n

IR-Eye

n

SCART Cable

n

Power adaptor 230V AC to 12V DC / 2A

2.0 CONNECTION

1. SAT IN - Connection for satellite antenna.
2. IR IN – Connection for remote control IR-eye.
3. DC IN – Power supply Adapter 12V DC in-jack.
4. Scart plug - for connecting your receiver to your TV set

3.0 REMOTE CONTROL

Remove the battery compartment cover and load two AAA (UM-4 or R03) batteries. Make sure that the
batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery
compartment. Close the battery compartment cover. If replacing of batteries is necessary, replace both
batteries. Do not mix new and used batteries otherwise, the operation lifetime will be much shorter than
normal. Remove the batteries if the unit will not be used for a prolonged period of time.
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly
at the infrared sensor of the unit during operation. If the sensor has been covered, the sensor will not
respond. The sensor may not able to receive the remote signal when it is exposed to direct sunlight
or a strong artificial light (fluorescent or strobe light). In this case, change the direction of the light or
reposition the unit to avoid direct lighting.

BE ENVIRONMENTALLY FRIENDLY
Do not dispose batteries as normal rubbish. Please dispose batteries following the Government’s regulation.

Advertising