Strong Enterprises SRT 60 - Manual (Page 13)

10
5.1 Channel Manager
For building favourite groups, moving, locking or deleting channels.
1. Press the MENU button to enter the “Main Page”.
2. Use UP/DOWN buttons to select “Channel Manager” and press OK.
3. Use UP/DOWN buttons to select “TV channels” or ”Radio channels” for modifying one of this
lists. Press OK to confirm.
4. Press the RED “Delete” button to delete channels. Use UP/DOWN buttons to select a
channel to delete and press OK to confirm (you can reverse the confirmation if you press OK
once again). Now press EXIT for deleting. Confirm the safety question with OK to delete the
chosen channel/s.
5. Press the GREEN “Favourite” button to make a Favourite channel list. Use UP/DOWN
buttons to select a channel and press OK to confirm.
6. Press the GREEN “Favourite” button again you can select the next one from the 6 favourite groups.
7. Press the YELLOW “Move” button to enter the sub-menu for moving channels in channel list.
Use UP/DOWN buttons to select a channel and press OK to confirm. Use the UP/DOWN
buttons to move the channel to the desired position and press OK to confirm the new position.
8. Press the BLUE “Lock” button to lock channels with PIN code. Use UP/DOWN buttons to
select a channel and press OK to confirm.
Note: To be able to lock channels Parental Lock must be set to “ON”. Please see the further
point 5.4.5 “Parental Lock” in “User Installation” below.
9. Press EXIT button to quit and save setting.
5.2 Program Guide
Pressing the EPG button on remote control opens the electronic program guide, which provides the
program information (depending on availability from broadcaster) You can also activate it via the menu:
1. Press the MENU button to enter the “Main Page”.
2. Use UP/DOWN buttons to select “Program Guide”. Press OK to enter this menu.
3. Use LEFT/RIGHT, UP/DOWN buttons to select program or channel.
4. Press the RED “Timer” button to set a timer function from selected program.
5. Press the GREEN “- 6” button to go direct 6 hours back in time line.
6. Press the YELLOW “+ 6” button to go direct 6 hours forwards in time line.
7. Press the BLUE “Detail” button to get extended program information.
8. Press EXIT button to quit and return.
5.3 Timer
It has two options described below.
1. Press the MENU button to enter the “Main Page”.
2. Use UP/DOWN buttons to select “Timer”. Press OK to enter.
3. Use UP/DOWN buttons to select Time Adjust or Time Reservation.