Strong Enterprises SRT 60 - Manual (Page 8)

5
E. If the product has been dropped or cabinet has been damaged.
F. When the product exhibits a distinct change in performance-this indicates a need for service.
19. Replacement Parts - When replacement parts are required, have the service technician verify that the
replacements he uses have the same safety characteristics as the original parts. Use of replacements
specified by the product manufacturer can prevent fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks recommended by the manufacturer to determine that the
product is in safe operating condition.
21. Heat - The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that products heat.
Safety Warnings
1. The normal operating temperature of the digital receiver is between 0 °C and 40 °C
2. Please prevent the receiver from operating in dusty conditions.
3. The receiver shall be operated in ventilated environment away from heat sources. No
objects filled with liquids, such as vases, shall be placed on the unit. The receiver shall not
be exposed to dripping or splashing. Should this happen, disconnect your receiver from the
main and consult your dealer.
4. Do not open or disassemble the outer chassis in order to avoid the danger of electric shock
and damaging to the receiver. Opening the chassis will also void the warranty.
5. The antenna connected to the receiver shall be equipped with anti-shock device from
lightning. If the mains plug or an appliance coupler is used as the disconnected device, the
disconnected device shall remain readily operable.
6. if the receiver is inoperative, please consult the Customer Support.
This receiver has been manufactured to satisfy international safety standards. Please read the following
recommended safety precautions carefully.
MAINS SUPPLY:
100 - 240 V ~ 50/60 Hz
POWER ADAPTER DC 12 V
OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in
fire or electrical shock.
LIQUIDS: Keep liquids away from the receiver.
CLEANING: Before cleaning, disconnect the receiver from the wall socket. Use a cloth lightly
dampened with water (no solvents) to clean the exterior.
VENTILATION: Do not block the receiver ventilation holes. Ensure that free airflow is maintained
around the receiver. Never store the receiver where it is exposed to direct sunlight
or near heating equipment e.g. a radiator. Never stack other electronic equipment
on top of the receiver. Place the receiver at least 30 mm from the wall.
ATTACHMENTS: Do not use any attachment that is not recommended by the manufacturer; it
may cause a hazard or damage the equipment.
CONNECTION TO THE SATELLITE DISH AND TV:
Connect all components before plugging any power cords into the wall outlet.
Always turn off the receiver, TV and other components before you connect or
disconnect any cables.