Sunbeam EM8800 - Manual (Page 13)

11
Filling of water and switching on
your Café Barista
™
Prior to switching on each time, check
whether the water reservoir is filled with
water. Every time the appliance is switched
on or off, it needs water for the Auto Clean
cycle.
Filling the appliance
• Slide out and remove the water reservoir
from the appliance. See figure 5.
• Fill the water reservoir always with fresh,
cold water. See figure 6.
Note: Fill only cold water into the water
reservoir. Never fill with other liquids, such
as mineral water or milk.
• Replace the water reservoir. Slide the water
reservoir in and press firmly into place to
ensure that the valve of the water reservoir
opens. See figure 7.
Note: If the water reservoir is not correctly
in position or if water needs to be refilled
while the espresso machine is in operation,
the water indicator illuminates. Making
coffee will not be possible or the cycle will
be interrupted.
Switching on the appliance
• Turn the power on at the power outlet
and switch the espresso machine on by
briefly pressing the ‘POWER’ button on the
control panel. See figure 8.
Note: Please note that you only need to
briefly press the ‘POWER’ button and that
there is a slight delay until the light comes
on.
Figure 5
Figure 6
Figure 7
Figure 8