Sunbeam EM8800 - Manual (Page 17)

15
Placing cup(s) under the espresso pour spout
and choosing the coffee pour volume
• Place one or two cups under the espresso
pour spout. The height of the pour spout
can be adjusted to suit the size of the
cup by lifting or lowering the pour spout
to reduce heat loss and or prevent the
espresso from splashing. See figure 15.
• Press the ‘coffee pour volume’ button
as many times as needed to reach the
required pour length. See figure 16.
The Café Barista™ pour volumes are set as
follows:
20mLs
30mLs
40mLs
Tip: The Café Barista™ is set to standard
volumes. If you want to adjust the respective
pour volumes, please refer to the instructions
in section ‘Changing and saving coffee pour
volumes and coffee strength settings’.
Making an espresso with coffee beans (continued)
Figure 15
Figure 16