Sunbeam EM8800 - Manual (Page 29)

27
• Replace the grinding ring.
• Slide the ‘grinding mechanism release’
button to the front in the direction of the
grinding mechanism. Hold this position
and turn the ‘coffee grind’ lever anti-
clockwise to the desired grind setting.
• Replace the ‘coffee bean hopper’ in
position ‘HOPPER RELEASE’ and turn it to
the coffee beans position. Now test the
function of the grinding mechanism with a
small quantity of beans and make a cup of
coffee.
Grind setting selection and maintenance (continued)
Figure 43
Figure 42 Figure 44
Resetting the Café Barista™
With this function, all previously changed
values can be reverted back to the original
settings for the Café Barista™. • Press buttons ‘CLEAN’ and ‘DESCALE’
simultaneously. Hold the buttons depressed
until all the lights on the control panel
turn off (takes approximately 3 seconds).
Release the ‘CLEAN’ and ‘DESCALE’
buttons and the Café Barista™ is now
reset.