Sunbeam EM8800 - Manual (Page 14)

• When the espresso machine is turned on
it will go through an Auto Clean cycle.
This removes any old coffee grinds from
the coffee brewing unit.
• During the heating procedure the
temperature indicator flashes. When
the operating temperature is reached, the
temperature indicator will stop flashing
and remain constant. See figure 9.
• The espresso machine is now ready for
operation.
12
Filling of water and switching on your Café Barista™ (continued)
Switching off your Café Barista
™
Figure 9
When the espresso machine is switched off
by briefly pressing the power button on the
control panel, another Auto Clean cycle is
carried out and the coffee waste container
indicator will flash as a reminder for
approximately 1 minute.
If the espresso machine is switched off
during a function by pressing the ‘POWER’
button all functions are immediately
switched off.