Sunbeam EM8800 - Manual (Page 27)

25
Changing and saving the set relationship
between each ‘coffee strength’ setting and the
‘length of coffee pour’ volumes
You may save a different ‘coffee strength’
setting for each ‘length of coffee pour’
setting.
• Press the ‘length of coffee pour’ button
as many times as needed to reach the
required cup symbol. See figure 37.
• Then press the ‘coffee strength selector’
button as many times as needed until the
indicator of the chosen coffee strength
illuminates and keep the button depressed.
See figure 38.
• After a few seconds of holding the
button depressed, all indicators are lit
permanently, except the one chosen. See
figure 39. Now let the button go.
Tip: Repeat this procedure if you want to
save the ‘coffee strength’ settings for the
remaining cup symbols too.
Note: The values saved remain even if the
espresso machine is switched off.
Changing and saving coffee pour volumes and coffee strength settings
(continued)
Figure 37
Figure 38
Figure 39