Sunbeam EM8800 - Manual (Page 26)

24
The Café Barista™ is set to standard
coffee pour volumes. These volumes can be
individually adjusted to your taste and stored.
Changing and saving coffee pour volumes
• Press the ‘length of coffee pour’ button
until the respective cup symbol illuminates
corresponding to the desired coffee pour
volume. See figure 34.
• Place a cup under the espresso pour spout.
See figure 35.
• Then press the one cup coffee button
and keep it depressed until the desired
coffee pour volume is reached. See figure
36. Release the button and your desired
coffee pour volume has been saved.
Tip: Repeat this procedure if you want to
adjust the coffee pour volumes of the other
cup settings.
Note: The volumes saved remain valid even
if the espresso machine is switched off. If
the size of your cup or your taste changes,
you may individually adapt the coffee pour
volume at any time.
Changing and saving coffee
pour volumes and coffee strength
settings
Figure 34
Figure 36
Figure 35