Schneider Electric TSXETG100 - Manual (Page 10)

ConneXium ™ Ethernet Gateway 63230-319-211A1
Setup 2/2006
© 2006 Schneider Electric. All Rights Reserved. 10
ENGLISH
User Accounts ETG users are assigned user names and passwords. Each user belongs to
a group, and each group has access rights to the ETG Web pages assigned
by the ETG administrator.
NOTE: There are two default user accounts: Administrator (password is
Gateway) and Guest (password is Guest).
Action Result
1. From the Setup page, click User
Accounts.
Opens the User Accounts page.
2. If you want to change a group name, type a
new name in one of the Groups text boxes
(the Administrator group name cannot be
changed).
Enters a new group name.
3. In the Users section, enter a Name (1 to 24
characters) and Password (0 to 12
characters) for a new user.
NOTE: User names and passwords are
case-sensitive and can contain only
alphanumeric characters.
Enters the name and password for a user.
4. Select a group and the default language for
the new user.
Selects the group and language for a user.
5. Repeat steps 3 and 4 for each additional
user you want to add.
Continues adding users.
6. Click Apply. Saves all of the user account settings.
Table 5: ETG accounts and passwords
Account Default Password
Administrator Gateway
Guest Guest
User-defined accounts (up to 11 accounts possible) No default –Password is user-defined
Figure 8: User Accounts Page