Schneider Electric TSXETG100 - Manual (Page 18)

ConneXium ™ Ethernet Gateway 63230-319-211A1
Instruction Bulletin 2/2006
ENGLISH
Electrical equipment should be installed, operated, serviced, and maintained only by
qualified electrical personnel. No responsibility is assumed by Schneider Electric for
any consequences arising out of the use of this material. www.schneider-electric.com
www.telemecanique.com
© 2006 Schneider Electric. All Rights Reserved.
FIRMWARE Firmware on the ETG can be updated using File Transfer Protocol (FTP).
Check www.telemecanique.com or with your local sales representative for
the latest firmware update.
Finding the Firmware Version
Getting New Firmware
Updating the Firmware File
Action Result
1. Log into the ETG. Opens the ETG home page.
2. Locate the firmware version on the
bottom-left corner of the page.
NOTE: If you recently updated your
firmware, press F5 to refresh the web page
and update the displayed firmware number.
Determines the firmware version of the ETG.
3. Alternatively, you can select Diagnostics >
Statistics to find the firmware version in the
Gateway Information section.
Also determines the firmware version of the
ETG.
Action Result
1. Launch Internet Explorer, type
www.telemecanique.com in the Address
text box, then press Enter.
Opens the Telemecanique web site.
2. Select Products, then click Product Index. Opens the Products page.
3. Select Systems and architectures. Displays the Systems and architectures card.
4. Click ConneXium. Opens the ConneXium systems and
architectures page.
5. Click Software/firm. Opens the software/firmware page.
6. Click the firmware file link (eg#####.bin,
where ##### is the firmware number), then
click Save.
Opens the File Download dialog box, then
saves the firmware file.
Action Result
1. Launch Internet Explorer, type ftp:// and the
IP address of the ETG in the Address text
box (for example, ftp://169.254.0.10), then
press Enter.
Opens the Log On As dialog box.
2. Type the user name Administrator and the
administrator password in the text boxes,
then click Log On.
Opens an FTP session with the ETG.
3. Locate the saved firmware file on your
computer, select it, then press CTRL+C.
Copies the firmware file to the clipboard.
4. Right-click in the Internet Explorer window,
then click Paste.
NOTE: Instead of copying and pasting the
firmware file, you can drag-and-drop the
firmware file into Internet Explorer.
Copies the firmware to the ETG, and the ETG
reboots.
5. Click the Close button on the Internet
Explorer window.
Closes Internet Explorer and ends the FTP
connection to the ETG.
6. To verify that the firmware version was
updated successfully, follow the steps in
“Finding the Firmware Version” on page 18.
Verifies the updated firmware version.