Read device registers, En g l is h – Schneider Electric TSXETG100 User Manual
Page 17
63230-319-211A1
ConneXium
™ Ethernet Gateway
2/2006
Diagnostics
© 2006 Schneider Electric. All Rights Reserved.
17
EN
G
L
IS
H
Read Device Registers
Action
Result
1. From the Diagnostics page, click Read
Device Registers.
Opens the Read Device Registers page.
2. Enter the device ID, starting register
number, and the number of registers to
read.
Enters the values to begin reading registers for
the specified device.
3. Click Read Holding Registers or Read
Input Registers.
Displays the values for the listed registers.
4. To change how the data is displayed in the
Value column, select Decimal,
Hexadecimal, Binary, or ASCII.
Selects how the data values are displayed.
Table 7:
ETG Read Device Register Settings
Option
Description
Default
Device ID
The address of the device that registers are read.
1
Starting Register
The first register to read.
1000
Number of Registers
The number of registers to read (1 to 10).
10
Register column
Lists the register numbers
—
Value column
Lists the data stored in a register.
—
Decimal, Hexadecimal,
Binary, or ASCII options
Select an option to specify how the Value column
data is displayed.
Decimal
Figure 13:
Read Device Registers Page