Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 16)

16
Chapter 2 Installation
Mounting
✐ AC cord must be disconnected when mounting or removing this product otherwise it may
damage the product.
✐ Do not install multiple Network Units into a projector otherwise it may damage the product.
✐ Connect the AC cord after connecting the LAN cable and computer.
[2] Installation and network configuration
Caution
!
1
Disconnect the AC plug from the
projector.
2
Remove the connector cover and screw
covers (2 pieces) from the projector and
insert plug on this product to the option
connector.
3
Tighten two screws by using a
coin etc.
Connector cover
Screw cover