Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 42)

42
Chapter 4 Controlling the Projector
Controls
Click Control on the main menu. The setting method differs depend-
ing on the contents of the page. Click on the page number to change
pages and select desired setting items.
✐ Please see the owner's manual of the projector to have the further information of
each control item.
✐ The control page displays valid control items depending on the selected input mode, signal
or functions of the projector you use, therefore, there may be different controls between the
described items and actual control items on the page display. For further information , refer to
the projector's owner's manual.
✐ When the projector is in standby, only the timer on the setting menu is effective; others are
inactive.
Item Description
Input .................. Selects input mode of the projector. (1 to 3)
Source ............... Selects signal source of the input.
Input 1 : RGB(PC analog)
RGB(Scart)
RGB(PC digital)
RGB(AV HDCP)
Input 2 : Video
Y,Pb/Cb,Pr/Cr
RGB
Input 3 : Video
Y,Pb/Cb,Pr/Cr
S-video
Input
This function is to select the input mode and source mode of the projector. Click Set
button after selecting the input and source mode.