Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 77)

77
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
Product specification
Product specification
Type .......................................PJ-Net Organizer (Network Unit)
LAN interface ........................Applicant regulation IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)
Data transfer speed 10Mbps/100Mbps
Data transfer mode Half duplex/Full Duplex
Terminal 8-pin modular (RJ-45)
Network protocol ..................TCP/IP specification TCP/IP
Serial interface ......................RS-232C
Baud rate 0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
Flow control Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check Odd/Even
Terminal D sub 9-pin Male
Power source ........................Supplied from the projector
Power consumption ..............3.0 watts
Dimensions (W x H x D) ........4.13" x 5.20” x 1.32” (105 x132 x 33.6 x mm)
Weight ...................................0.57 lbs (258 g)
Built-in battery .......................Lithium battery, Type CR2032, 3.0V
Operating temperature .........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature .............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.