Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 50)

50
Chapter 4 Controlling the Projector
Check the saved items
Click Check button to check the current setting condition of the controls. Each item of
"PC adj.", "Control" and "Setting" is displayed sequentially.
Load a control set
Select your desired set number
(Totalsave1 to Totalsave10) with the pull-
down menu button of Load Set and
then click Load button. The setting val-
ues of the selected set number are
applied to the current settings.
Select a set
number
✐ If the contents of the saved set are not matched for the inputs equipped on the projector, the
invalid alert message may be displayed.
Click Stop button to cancel
the auto page display.