Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 60)

60
Chapter 4 Controlling the Projector
Conf. & Change page in the light mode
Following functions in the "Conf. & Change" page are
not available in the light mode.
- Changing the control mode.
- Deleting the registered IP address
- Indicating the each status
- Indicating the each memo
Controlling all together
"Power & Status", "PC adjustment", "Control" and
"Setting" can be controlled all together. Set "ON" the
multi control setting and adjust controls of each menu.
The setting value is applied to the registered projec-
tors sequentially .
✐
This is effective only if the mode of the registered projector
is set to "Control".
Setting all together
"E-mail setting", "SNMP setting" and "Timer" can be
set all together. Set "ON" the multi control setting and
items of each menu. The setting value is applied to the
registered projectors sequentially.
✐
This is effective only if the mode of the registered projector
is set to "Control".
This indicates that the
mode is "Control".
(Conf.&Change page in the light mode)