Sanyo PJ-Net Organizer Plus POA-PN40 - Manual (Page 21)

21
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
Installation and network configuration
How to enter the numbers with the screen 10-key pallet
1
Select a column with a red frame by using the point buttons 7 8 .
2 Press SELECT button. The screen 10-key pallet appears on the screen.
3 By using the point buttons(d e 7 8), select numbers 0 to 9 and press SELECT
button. By repeating the above to enter the complete number on the column.
* To change the number in a column, select “C” and press SELECT button to clear the number
in the column and then enter the number again.
4
After entering the number in the column, select a move key (7 8 e d) located on
the lower part of the pallet by using the point buttons and press SELECT button
repeatedly to move the red frame.
5
Repeat steps 3 to 4 for entering all the network address.
6
After finishing, select "Exit" and press SELECT button. The 10-key pallet disappears
on the screen.
Exit
10-key pallet