SUPER MICRO Computer SUPERSERVER 6012L-6 - Manual (Page 12)

S UPER S ERVER 6012L-6 Manual
1-2
1-2 Server Chassis Features
The SC812-EO is Supermicro's second-generation 1U chassis and features
three hard drive bays, two front side USB ports and a revolutionary cooling
design that can keep today's most powerful processors running well below
their temperature thresholds. The following is a general outline of the main
features of the SC812-EO chassis.
System Power
When configured as a SuperServer 6012L-6, the SC812-EO chassis in-
cludes a 400W cold-swap power supply.
SCSI Subsystem
The SCSI subsystem supports three 80-pin SCA Ultra160 SCSI hard drives.
(Any standard 1" drives are supported. SCA = Single Connection Attach-
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings. The SCSI drives are
also hot-swap units.
Control Panel
The SC812-EO control panel provides important system monitoring and con-
trol information. LEDs indicate power on, network activity, hard disk drive
activity and system overheat conditions. Also present are a main
l
Rackmount hardware (with screws):
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails to a rack/telco rack
l
One (1) CD-ROM containing drivers and utilities:
Intel LANDesk Client Manager
ATI Rage XL 8MB PCI graphics controller driver
LAN driver
SCSI driver
l
SuperServer 6012L-6 User's Manual
* Type and number depends upon the configuration ordered.