Event log configuration – SUPER MICRO Computer SUPERSERVER 6012L-6 User Manual

Page 83

Advertising
background image

Chapter 7: AMIBIOS

7-13

Event Log Configuration

Event Logging

This option Enables or Disables the logging of events. You can use this

screen to select options for the Event Log Configuration Settings. You can

access sub screens to view the event log and mark all events as read. Use

the up and down arrow keys to select an item, and the plus (+) and minus

(-) keys to change the option setting. The settings are described on the

following pages. The screen is shown below.

ECC Event Logging

This option Enables or Disables the logging of ECC events. The events

logged by AMIBIOS are post errors such as a bad BIOS, floppy errors, or

hard drive errors.

Clear All Event Logs

This option can be used to tell the system to clear the event log on the next

boot up. The settings are No and Yes.

View Event Log

Highlighting this and pressing <Enter> will allow you to view the unread

events from the event log area.

Mark All Events As Read

Highlighting [OK] and pressing <Enter> will mark all events in the log area as

having been read. The settings are OK and Cancel.

Advertising