SUPER MICRO Computer SUPERSERVER 6012L-6 - Manual (Page 90)

7-20
S UPER S ERVER 6012L-6 Manual
Power Button Mode
This option allows you to change the function of the chassis power
button. The settings are On/Off and Suspend. When set to Suspend,
depressing the power button when the system is up will cause it to
enter a suspend state.
Sleep Button Enable
This option allows you to enable the use of a sleep button that can be
connected to the motherboard. The settings are Disabled and Sus-
pend.
Video Power Down
This option specifies the power state that the VGA video subsystem
enters after the specified period of display inactivity has expired. The
settings include Disabled, Standby, Suspend and Sleep.
Suspend Timeout
This option specifies the length of hard disk inactivity time that should
expire before entering the power conserving state. The settings are
Off, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 (minutes).
ACPI Aware O/S
This option allows the system to utilize Intel's ACPI (Advanced Configuration
and Power Interface) specification. Settings are No and Yes. DOS®,
Windows 3.x®, and Windows NT® are examples of non-ACPI aware oper-
ating systems. Windows 95®, Windows 98®, Windows ME® and Windows
2000® are examples of ACPI aware operating systems.
Power Management
When enabled, this option displays the following four options relating to
power management. The settings are Disabled and Enabled.