SUPER MICRO Computer SUPERSERVER 6012L-6 - Manual (Page 64)

6-4
S UPER S ERVER 6012L-6 Manual
Figure 6-2. System Cooling Fans
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SCSI Drives: You do not need to access the inside of the chassis to
replace or swap SCSI drives. Proceed to the next step for instructions.
Note: You must use standard 1" high, 80-pin SCA SCSI drives in
the SuperServer 6012L-6.
CD-ROM/Floppy Disk Drive: For installing/removing the CD-ROM or floppy
disk drive, you will need to gain access to the inside of the 6012L-6 by
removing the top cover of the chassis. Proceed to the "CD-ROM and
Floppy Drive Installation" section in this chapter for instructions.