Sabo 108-17 HS - Manual (Page 27)

Operating - 23
OPERATING
Using Mulch Cover
Side Discharge
1. Disconnect hooks from slot and wheel bracket and
remove mulch cover when side discharge is preferred.
2. Make sure the correct blades are installed for maximum
side discharge operation.
Mulching
MX8868
1. Raise discharge chute (A) and metal deflector (B).
2. Install mulch cover (C) onto mower deck. Mulch cover lip
(D) must be seated in mower deck groove.
3. Hook mulch cover to slot (E) on left side and wheel
bracket hole (F).
4. Lower discharge chute and metal deflector.
5. Make sure the correct blades are installed for maximum
mulching operation.
Using CargO Mount System™
MX7694
A - Front and Rear CargO Mount System™
The front and rear CargO Mount System™ brackets (A)
can be used for easy attachment of selected optional
equipment.
Use Sabo approved optional equipment only. See your
Sabo dealer for approved optional equipment.
Using Storage Accessory
MX10524
• Use the storage pocket (A) for small items such as
gloves.
Using Weights
c
CAUTION: Avoid injury! Rotating blades are
dangerous. Before adjusting or servicing
mower:
• Disconnect spark plug wire(s) to prevent
engine from starting accidently.
• Always wear gloves when handling mower
blades or working near blades.
A
B
E
C
F
D
c
CAUTION: Avoid injury! The machine may
become unstable when operating on slopes
and/or with some attachments.
Use weights to improve stability when
operating on slopes or using attachments.
Remove weights when not required.
A
A
A