Sabo 108-17 HS - Manual (Page 32)

Service Lubrication - 28
SERVICE LUBRICATION
Service Lubrication
Grease
Use grease based on the expected air temperature range
during the service interval.
Greases that may be used are:
• SAE Multipurpose EP Grease with 3 to 5 percent
molybdenum disulfide.
• SAE Multipurpose EP Grease.
• Greases meeting Military Specification MIL-G-10924C
may be used as arctic grease.
Lubricating Front Axle Pivot
MX10500
• Lubricate front axle center pivot (A) with one or two
shots of general all-purpose grease.
Lubricating Front Axle Wheel Spindles and
Bearings
MX7700
• Lubricate front wheel spindles (A) and bearings (B), one
on each side, with one or two shots of general all-purpose
grease.
Lubricating Seat
MX7699
• Lubricate plastic washers and bushings (A) under the
seat with a general all-purpose spray lubricant.
Lubricating Pivot Points
MX10515
Picture Note: 107 cm (42 in.) deck used for
illustration.
A - Lift Pivots
B - Mower Deck Pivot Points (on both sides)
A
A
B
A
A
B