Sabo 108-17 HS - Manual (Page 46)

Service Electrical - 42
SERVICE ELECTRICAL
M71044
A - Booster Battery
B - Disabled Vehicle Battery
1. Connect positive (+) booster cable to booster battery (A)
positive (+) post (C).
2. Connect the other end of positive (+) booster cable to
the disabled vehicle battery (B) positive (+) post (D).
3. Connect negative (–) booster cable to booster battery
negative (–) post (E).
4. Connect the other end (F) of negative (–) booster cable
to a metal part of the disabled machine frame away from
battery.
5. Start the engine of the disabled machine and run
machine for several minutes.
6. Carefully disconnect the booster cables in the exact
reverse order: negative cable first and then the positive
cable.
Replacing Headlight Bulb
1. Park machine safely. (See Parking Safely in the
SAFETY section.)
2. Lift hood.
MX10504
3. Turn bulb socket (A) 1/4 turn counterclockwise to
remove.
4. Replace defective bulb with a new bulb.
5. Insert bulb socket into housing, push in and turn 1/4 turn
clockwise to install.
6. Lower hood.
Replacing Fuse
1. Park machine safely. (See Parking Safely in the
SAFETY section.)
2. Lift hood.
MX7686
3. Pull defective fuse (A) out of socket.
4. Check metal clip in fuse window and discard fuse if clip
is broken.
5. Push new 20 amp fuse into socket.
6. Lower hood.
B A
E
C
D
F
A
A