Scanner emulation parameter defaults, Scanner emulation parameter defaults -4 – Symbol Technologies DS 3408 User Manual
Page 146
DS 3408 Product Reference Guide
11-4
3.
Scan the Scanner Emulation Host bar code from
Scanner Emulation Host on page 11-6
to enable the Scanner Emulation host
interface.
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
Scanner Emulation Parameter Defaults
lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in the
Scanner Emulation Host Parameters section beginning on page
.
See
Appendix A, Standard Default Parameters
for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
WARNING
Note