Symbol Technologies DS 3408 - Manual (Page 47)

User Preferences 4-5
User Preferences
Set Default Parameter
Scan this bar code to return all parameters to the default values listed in Table A-1 on page A-3 .
Parameter Scanning
Parameter # ECh
To disable decoding of parameter bar codes, scan the Disable Parameter Scanning bar code below. Note that the Set Defaults
parameter bar code can still be decoded. To enable decoding of parameter bar codes, either scan Enable Parameter Scanning or
Set All Defaults.
*Set All Defaults
*Enable Parameter Scanning
(01h)
Disable Parameter Scanning
(00h)