Symbol Technologies DS 3408 - Manual (Page 345)

Standard Default Parameters A-9
UCC/EAN Code 128 Emulation Mode for UCC/EAN
Composite Codes F0h ABh Disable 13-54
2D Symbologies
PDF417 0Fh Enable 13-55
MicroPDF417 E3h Disable 13-55
Code 128 Emulation 7Bh Disable 13-56
Data Matrix F0h 24h Enable 13-57
Maxicode F0h 26h Enable 13-57
QR Code F0h 25h Enable 13-58
Symbology-Specific Security Levels
Redundancy Level 4Eh 1 13-59
Security Level 4Dh 0 13-61
Intercharacter Gap Size F0h 7Dh Normal 13-62
Report Version 13-62
Macro PDF
Flush Macro PDF Buffer 13-63
Abort Macro PDF Entry 13-63
Miscellaneous Scanner Options
Transmit Code ID Character 2Dh None 14-5
Prefix Value 63h, 69h 7013 <CR><LF> 14-6
Suffix 1 Value
Suffix 2 Value
62h, 68h
64h, 6Ah
7013 <CR><LF> 14-6
Scan Data Transmission Format EBh Data as is 14-7
FN1 Substitution Values 67h, 6Dh Set 14-8
Transmit “No Read” Message 5Eh Disable 14-9
Synapse Interface F0h ACh Standard 14-10
Table A-1. Standard Default Parameters Table (Continued)
Parameter
Parameter
Number Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.