Sangean K-200 - Manual (Page 12)

11
Operating your radio – Search tuning AM/FM
1. Press the Standby button to switch on your radio.
2. Press the Band button as needed until the AM or FM band
is selected.
3. Press and release the Tuning knob to carry out an auto-tune.
Your radio will scan up the AM/FM band from the currently displayed
frequency and will stop scanning automatically when it finds a station
of sufficient strength.
4. The display will show the frequency of the signal found. If the signal
is strong enough and there is RDS information available, the display
will show the radio station name soon after and the RDS icon will
appear on the display.
5. When the end of the waveband is reached your radio will
recommence tuning from the opposite end of the waveband.
6. Use the Volume control to adjust the sound level as required.
3
6
2