Sangean K-200 - Manual (Page 25)

24
Display
Brightness control
The brightness of the display when the unit is in standby mode may
be adjusted. If you use the unit in the bedroom, you may prefer a lower
standby brightness level than the standard setting.
1. Press and release the Backlight button to adjust the current
brightness level of the LCD display. The backlight level will change
with 8 different illumination levels so that you can see the effect of
the change.
2. Stop when the desired backlight level is selected.
Moon LED
When using the radio, you can turn on the scenario LED at the bottom
of the receiver for your better listening experience.
1. Press and hold the Light button to adjust the current scenario
LED setting.
2. When the LED is on, press and hold the Light button to turn off
the LED.
3. To switch and LED back on, press and hold the Light button again to
turn on the LED.
GB