Sangean K-200 - Manual (Page 20)

19
Setting the alarm clock
Your K-200 radio has two alarms which can each be set to wake you to
AM/FM radio, buzzer alarm or voice messages. The alarms may be set
while the unit is in standby mode or while playing.
1. Before setting an alarm ensure that the clock time is set. Press and
hold the Alarm 1 button to enter the alarm 1 setting.
2. The hour setting of alarm 1 will begin to flash. Rotate the Tuning
control to select the required alarm hour, and press and release the
Tuning control to confirm the setting. Rotate the Tuning control to
select the required alarm minute, and press and release the Tuning
control to confirm the setting.
3. Then the display will show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAYS – the alarm will sound only on weekdays
WEEKENDS – the alarm will sound only at weekends
Press the Tuning control to confirm the setting. If you choose to
set the alarm to Once you will also need to set the time using the
Tuning control.