Sangean K-200 - Manual (Page 22)

21
When the alarm sounds
To cancel a sounding alarm, press and hold the Alarm 1 or Alarm 2
button until the radio beeps once, and the display shows “ALR OFF”.
And The LCD will return to normal display.
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for 1 minute and silence for
1 minute in repetition for 60 minutes unless cancelled.
The radio will sound non-stop at the selected time for up to 60 minutes
for other alarm types.
Disabling/cancelling alarms
To disable an active alarm, either press and release the Standby button,
or press and hold the according alarm button to cancel the alarm.
Snooze
1. When the alarm sounds, press any button other than the Standby
button will silence the alarm for five minutes. “SNOOZE” will begin
flashing on the display.
2. To cancel the snooze timer while the alarm is suspended, press the
Standby button.
2