Sangean K-200 - Manual (Page 26)

25
Message function
The message function can record and playback with 2 sets of voice
message for 30 seconds each.
1. Press and hold the Message button to record the voice up to
30 seconds length. The LED is lighted during recording and the
display will show “RECORD”. Press and release the Message button
to pause the recording. After recording the LED will start flashing.
2. Press and release the Message button to playback the voice content,
and the display will show “PLAYING”. Press the message button to
pause the message while it is being playback. The LED will stop
flashing after message is played.
3. To overwrite an existing message, press and hold the Message
button for 2 seconds to start recording a new message.
4. This Message button can operate in power on or off mode. In power
on mode the receiver even in AM or FM as well as Aux-in will mute
during the voice message processing.
1-3