Sangean K-200 - Manual (Page 17)

16
Clock and Alarms
Setting the time format
The clock display used in stand-by mode and on the playing mode
screens can be set to 12 or 24 hour format. The selected format is then
also used when setting the alarms.
1. Make sure your radio is in power off mode.
2. Press and hold the Tuning control knob until the radio beeps twice
and the setting of time format begins to flash.
3. Rotate the Tuning control to select either 12 or 24 hour format.
Press and release the Tuning control to confirm your choice of
clock format. The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock for the
setting of alarms, and will display a 12 hour clock with a PM indicator
when in stand-by mode.
2,3
GB