Sun Microsystems GigaSwift Ethernet Adapter User Manual
Page 105
Appendix B
Using the Sun GigaSwift Ethernet Driver in Solaris 9 x86 Operating Systems
83
Note –
After the installation script runs, you see a summary of the software package
or patch that was installed. You can also find a log of the installation in
/var/tmp
.
The log file information is displayed when the installation completes unless the
software meets or exceeds the required package or patch level.
Example: All Requirements Met on Solaris x86 Systems
Following is an example of an installation script output if the driver and patch
requirements are met on the Solaris 9 x86 Operating System:
CODE EXAMPLE B-1
Script Output for x86 Systems When Requirements Are Met
Product Installation
1 - Dual Gigabit Ethernet Dual SCSI/P Adapter
2 - GigaSwift Ethernet Adapter (copper/fiber)
3 - GigaSwift Ethernet Compact PCI Adapter
4 - Quad GigaSwift Ethernet Adapter
Please select the product to install: 2
GigaSwift Ethernet Adapter Driver Installation.
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
*** Checking for correct version of GigaSwift Ethernet Driver
Packages...
*** Checking for correct version of GigaSwift Ethernet Driver
Patches...
*** Checking for correct version of VLAN Utility Driver Packages..
*** Checking for correct version of VLAN Utility Driver Patches...
The CE/VLAN driver(s) installed on this system for:
GigaSwift Ethernet Adapter Driver
meets or exceeds the required package or patch version. No changes
to the system are required - exiting.