Sun Microsystems GigaSwift Ethernet Adapter - Manual (Page 37)

Chapter 2 Installing the Adapter 15
▼ To Install the Software Using the Installation
Script
1. At the system console, become superuser (root).
2. Insert the Sun GigaSwift Ethernet Adapter CD into a CD-ROM drive that is
connected to your system.
■ If your system is running Sun Enterprise Volume Manager, it should
automatically mount the CD-ROM to the
/cdrom/cdrom0 directory.
■ If your system is not running Sun Enterprise Volume Manager, mount the CD-
ROM as follows:
Note – If you are installing the software from the download site, follow the online
download instructions.
3. Change to the directory were the installation script resides:
Where:
■
media_path = /cdrom/cdrom0 , if you are installing from the CD-ROM.
Or
■
unzipped GigaSwift_path/ Sun_GigaSwift_Ethernet_Driver , if you
downloaded the driver from the Sun download center.
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0
# cd / media_path /