Sun Microsystems GigaSwift Ethernet Adapter User Manual
Page 94
72
Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
■
If nothing is reported back on
SUNWced
or
SUNWcedx
, then proceed to Step 4 and
select
SUNWcea
,
SUNWceax
,
SUNWced.u
,
SUNWcedx.u
,
SUNWcedu
, and
SUNWcem
(if present).
■
If nothing is reported back for
SUNWvld
or
SUNWvldx
, then proceed to Step 4 and
select
SUNWvld
,
SUNWvldx
, and
SUNWvldu
packages.
■
If nothing is reported back, then proceed to Step 4 and select "all" packages.
4. Install the software packages by typing the following at the command line,
replacing the
OS_VER with your version of the Solaris operating system:
■
If your system is running Solaris 7 or 8 software type the following:
Where OS_VER is 7 or 8
For example, if your system is running the Solaris 8 operating system, you would
type the following:
■
If your system is running Solaris 9 SPARC software type the following:
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_
OS_VER
/Packages/
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_8/Packages/
# /usr/sbin/pkgadd -d /cdrom/cdrom0/GigaSwiftEthernet/Solaris_9/Sparc/Packages/