Sun Microsystems GigaSwift Ethernet Adapter - Manual (Page 60)

38 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
GigaSwift Ethernet Driver Parameter Values and
Definitions
TABLE 4-1 describes the parameters and settings for the ce device driver.
TABLE 4-1 ce Driver Parameter, Status, and Descriptions
Parameter Status Description
instance Read and write Device instance
adv-autoneg-cap Read and write Operational mode parameter
adv-1000fdx-cap Read and write Operational mode parameter
adv-1000hdx-cap Read and write Operational mode parameter
adv-100T4-cap Read and write Operational mode parameter
adv-100fdx-cap Read and write Operational mode parameter
adv-100hdx-cap Read and write Operational mode parameter
adv-10fdx-cap Read and write Operational mode parameter
adv-10hdx-cap Read and write Operational mode parameter
adv-asmpause-cap Read and write Flow control parameter
adv-pause-cap Read and write Flow control parameter
master-cfg-enable Read and write Gigabit link clock mastership controls
master-cfg-value Read and write Gigabit link clock mastership controls
enable-ipg0 Read and write Enable additional delay before transmitting a packet
ipg0 Read and write Additional delay before transmitting a packet
ipg1 Read and write Interpacket gap parameter
ipg2 Read and write Interpacket gap parameter
rx-intr-pkts Read and write Receive interrupt blanking values
rx-intr-time Read and write Receive interrupt blanking values
red-dv4to6k Read and write Random early detection and packet drop vectors
red-dv6to8k Read and write Random early detection and packet drop vectors
red-dv8to10k Read and write Random early detection and packet drop vectors
red-dv10to12k Read and write Random early detection and packet drop vectors
tx-dma-weight Read and write PCI interface parameter
rx-dma-weight Read and write PCI interface parameter