Example 1: all requirements met on sparc systems – Sun Microsystems GigaSwift Ethernet Adapter User Manual
Page 38
16
Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
4. Execute the installation script:
The script displays a menu of products:
5. Select 2, the Sun GigaSwift Ethernet adapter, and answer the questions, if
required, in the installation script.
Note –
After the installation script runs, you see a summary of the software package
or patch that was installed. You can also find a log of the installation in
/var/tmp
.
The log file information is displayed when the installation completes unless the
software meets or exceeds the required package or patch level.
Example 1: All Requirements Met on SPARC Systems
Following is an example of an installation script output if the driver and patch
requirements are met on SPARC systems:
# ./install
Product Installation
1 - Dual Gigabit Ethernet Dual SCSI/P Adapter
2 - GigaSwift Ethernet Adapter (copper/fiber)
3 - GigaSwift Ethernet Compact PCI Adapter
4 - Quad GigaSwift Ethernet Adapter
Please select the product to install: 2
CODE EXAMPLE 2-1
Script Output for SPARC Systems When Requirements Are Met
Product Installation
1 - Dual Gigabit Ethernet Dual SCSI/P Adapter
2 - GigaSwift Ethernet Adapter (copper/fiber)
3 - GigaSwift Ethernet Compact PCI Adapter
4 - Quad GigaSwift Ethernet Adapter
Please select the product to install: 2
GigaSwift Ethernet Adapter Driver for sparc Installation.
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.