Gigaswift ethernet driver operating statistics, Table 4-11 – Sun Microsystems GigaSwift Ethernet Adapter User Manual

Page 76

Advertising
background image

54

Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004

GigaSwift Ethernet Driver Operating
Statistics

These statistics are part of the statistics presented by the

netstat -k

command.

TABLE 4-11

describes the read-only Media Independent Interface (MII) capabilities.

These parameters define the capabilities of the hardware. The Gigabit Media
Independent Interface (GMII) supports all of the following capabilities.

TABLE 4-11

Read-Only

ce

Device Capabilities

Parameter

Description (Local interface Capabilities)

cap_autoneg

0 = Not capable of autonegotiation
1 = Autonegotiation capable

cap_1000fdx

Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable

cap_1000hdx

Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable

cap_100fdx

Local interface full-duplex capability
0 = Not 100 Mbit/sec full-duplex capable
1 = 100 Mbit/sec full-duplex capable

cap_100hdx

Local interface half-duplex capability
0 = Not 100 Mbit/sec half-duplex capable
1 = 100 Mbit/sec half-duplex capable

cap_10fdx

Local interface full-duplex capability
0 = Not 10 Mbit/sec full-duplex capable
1 = 10 Mbit/sec full-duplex capable

Advertising