Sharp AR-M208 - Manual (Page 112)

FINISHER (AR-FN5 N)
110
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Misfeed removal
The copier will stop when a misfeed occurs. The message "Clear paper path." will appear along with a
display of paper misfeed locations. When a misfeed is indicated for the finisher, follow the procedure
below.
1 Pull the handle of the stapler compiler cover and open the cover.
2 Remove any misfed paper from the transport area.
3 If staple sort copying is being done, open the paper guide and remove
any misfed paper from the stapler compiler.
Ar-M208_sec.book 110 ページ ２００２年６月１３日 木曜日 午後２時３７分