Sharp AR-M208 User Manual
Page 35
TWO-SIDED COPYING
33
2
MA
KING COP
IE
S
2
Press the 2-SIDED COPY key.
●
The 2-sided copy mode selection screen will appear.
3
Use the and keys to select two-sided to one-sided copying.
4
Use the or key to select binding change if desired. Then, press the
OK key.
●
The image of one side can be rotated 180º using the image rotation feature. This feature
can be useful depending on the orientation of the original image and the desired binding
position.
5
Set the number of copies and press the START (
) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray. This may cause
misfeeds.
COPY MODE
1 to 1
1 to 2
2 to 2
1
2
2
2
COPY MODE
2
1
2
2
2
1
1 to 2
2
to 2
2 to 1
BINDING CHANGE
OFF
Ar-M208_sec.book 33 ページ ２００２年６月１３日 木曜日 午後２時３７分