Sharp AR-M208 - Manual (Page 17)

PART NAMES AND FUNCTIONS
15
1
GE
T
T
IN
G
S
T
ARTE
D
Ready to copy.
8 11 1
2 /
8 11 1
2 /
100%
AUTO
100%
AUTO
AUTO IMAGE key (p. 37)
Press for automatic copy ratio selection.
2-SIDED COPY key (p. 28)
Press to select the 1-sided to 1-sided, 1-sided to
2-sided, 2-sided to 2-sided or 2-sided to 1-sided
copy mode.
OUTPUT key (p. 49)
Press to select the sort, group or staple sort*
mode.
* To select the staple sort mode, an optional
finisher must be installed.
SPECIAL FUNCTION key
Press to select special functions.
Arrow keys
Press to move the highlighted item in the
display.
AUDIT CLEAR key (p. 21)
Press to close an open account.
Zero key
Use as part of numeric keys to enter copy
quantity.
Press during a continuous copy run to display
the number of copies completed in the current
run.
PROGRAM/READ-END key (p. 50, 67)
Press to select the job memory mode.
Press to finish scanning of originals and to start
copying when copying in the sort, group or
staple sort mode from the platen glass.
CLEAR (C) key
Press to clear the copy quantity display or press
during a copy run to terminate copying.
Exposure display
Indicates the selected exposure mode.
Message display
Messages are displayed regarding copier status
and operation.
Original size display
The original paper size is displayed.
Copy ratio display
Displays the copy ratios for reductions or
enlargements.
Paper size display
Displays the selected paper size. When "AUTO"
is displayed, paper size matching the original
and copy ratio will be automatically selected.
Paper tray display
The selected paper feed location is highlighted.
Ar-M208_sec.book 15 ページ ２００２年６月１３日 木曜日 午後２時３７分