Loading copy paper, Changing the copy paper size in the tray, Misfeed removal – Sharp AR-M208 User Manual
Page 115
500-SHEET PAPER FEED UNIT (AR-D11)/2x500-SHEET PAPER FEED UNIT (AR-D12)
113
6
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Loading copy paper
The method of loading copy paper for these paper feed units is the same as for the paper trays in the
copier. See page 86.
Changing the copy paper size in the tray
The method of changing the copy paper size is the same as for the paper trays in the copier. See page
88.
Misfeed removal
The copier will stop when a misfeed occurs. The message "Clear paper path." will appear along with a
display of paper misfeed locations.
1
Open the side cover of the paper tray which was in use and remove
the misfed paper.
●
Be sure to perform this step before pulling out the paper trays. If not, the paper may be
torn as the trays are opened.
Ar-M208_sec.book 113 ページ ２００２年６月１３日 木曜日 午後２時３７分