Sharp AR-M208 - Manual (Page 59)

57
3
S
P
E
C
IAL FUNCTIONS
2 IN 1 OR 4 IN 1
The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a specified order, onto one
sheet.
● These features cannot be used with the dual page copying, XY zoom, erase or margin shift features.
● Copies can be made with or without the border lines.
● The order of originals which will be arranged on the copies can be selected. There are two patterns of
layout for 2 in 1 copying and four patterns of layout for 4 in 1 copying.
● Non-standard size paper cannot be used with the 2 in 1 or 4 in 1 feature.
● If this feature is set, the copy ratio will be automatically set and cannot be changed manually.
● The 2 in 1 or 4 in 1 feature cannot be set for interrupt copying. While 2 in 1 or 4 in 1 is being set,
interrupt will not function.
1 Place an original on the platen glass or in the document feeder tray.
2 Use the PAPER SELECT key to select the paper tray with the desired
paper size.
4 in 1 copying
2 in 1 copying
Pattern Pattern Pattern Pattern
Pattern Pattern Pattern Pattern
Document feeder tray
Ar-M208_sec.book 57 ページ ２００２年６月１３日 木曜日 午後２時３７分