Sort no sort sort group – Sharp AR-M208 User Manual
Page 51
SORT/GROUP
49
3
S
P
E
C
IAL FUNCTIONS
2
Press the OUTPUT key.
●
The output mode selection screen will appear.
3
Use the and keys to select the desired output mode and press the
OK key.
●
Also the OUTPUT key can be used to select an output mode.
4
Make all other desired copier selections and press the START (
)
key.
●
If originals have been set in a RSPF in step 1, copying will start. If an original has been
set on the platen glass, proceed to the next step.
5
Replace the finished original with the next original and press the
START (
) key after it lights up. Repeat this step until all originals
have been scanned.
●
If the non-sort mode has been selected in step 3, copying will start each time the START
(
) key is pressed.
SORT
NO SORT
SORT
GROUP
3
1
2
1
1
1
Ar-M208_sec.book 49 ページ ２００２年６月１３日 木曜日 午後２時３７分